Safety Pack; Using Your Appliance; Use Of The Control Panel - Brandt TI2010R Mode D'emploi

Iron oil frying pan
Enamel stainless steal kettle
Requirement for pot materials: containing magnetic induction materials. All the test and
authentication of thus product is based on the 430 cookware (bottom diameter 180+/-
10mm).The other cookware can not guarantee the best results and performance.
Shape requirement: you can use pots with a diameter (on the higher part) from 12 to 26 cm.
d) Safety pack
Over-temperature protection. If the temperature inside the induction cooker body is
-
too high, the appliance will stop heating.
Over current or voltage abnormality protection. When voltage is abnormal or
-
current changes abruptly, the induction cooker will stop. Once the issues are solved, the
induction cooker will work again normally.
Container detection system. If a pot is moved during process, the unit will stop
-
heating immediately. The appliance will emit a sound and after 1 minute it will
automatically return to standby mode.
Automatic shutdown protection. When the time selected is reached, the induction
-
cooker will shut off automatically until the user triggers the timer again.
Control Lock (10). This pad allows locking all the control panel to simplify the cleaning
-
but also to preserve and safe children from all risks.

3) USING YOUR APPLIANCE

a) Use of the control panel
The sensitive pads work with a sense of touch. It is not necessary to put pressure on.
-
Use the base of your finger and not the tip as indicated on the images below
-
Slide your finger on the slider to increase or decrease the power.
-
You will hear a beep each time an action will be registered.
-
The control panel must be clean, dry and not be covered by an object or a cloth; even a
-
thin layer of water can create dysfunction.
Stainless steal pot
Enamel cooking ustensil
Iron pan
24
Iron kettle
Iron plate