Receiving Faxes - Epson WF-2520 Guide Rapide

Masquer les pouces Voir aussi pour WF-2520:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To use a group dial entry, press the
select or type the number of a group dial entry, and press
Color
x
Note: For more information on setting up group dial entries, see the online
User's Guide.
If you've connected a telephone to the product, dial the number from the phone.
Select
Send
Note: Don't hang up the phone until you begin transmitting the fax.
Note: If you turn off the product, the following data stored in the product's temporary
memory will be lost: received faxes that haven't yet been printed, faxes scheduled to
be sent later, and faxes being retransmitted automatically.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the correct settings for the
paper you've loaded. Also, enable the Auto Answer feature if you would like to receive faxes
automatically.
1.
Press the K
2.
Press u or d to select
3.
Press u or d to select
4.
Press u or d to select
5.
Press u or d to select the paper size you loaded, then press
Note: If the incoming fax is larger than the paper you loaded, it is reduced to fit or
printed on multiple pages, depending on the Auto Reduction setting you select.
6.
To receive faxes automatically, press u or d to select
u or d to select
7.
Press x
Note: To change the number of rings before the product answers, see page 18.
If you run out of paper during printing, you see an error message. Load more paper and
press
to continue.
OK
To receive faxes manually, turn off the Auto Answer feature and follow these steps:
1.
When your telephone rings, lift the phone off the hook.
2.
Press
to select
2
3.
After all the pages are received, replace the phone on the hook.
4.
Press
OK
20
Receiving Faxes
button
Start
, then press the
B&W
button, then press x
Fax
Fax Settings
Send/Receive Setup
Paper Size
, then press
On
when done.
Menu
, then press
Receive
to print the fax.
Speed Dial/Group Dial
or
Color
x
Start
.
Menu
, then press
.
OK
, then press
, then press
.
OK
again.
OK
to select
.
1
Yes
button twice,
. Then press the
OK
button.
.
OK
.
OK
, press
Auto Answer
or
B&W
, press
OK

Publicité

Table des Matières
loading

Table des Matières