Maxtec BIRD Blender Buddy Instructions D'utilisation page 3

10. Verify white bleed control plug is inside port of the large block.
11. Attach large block C A to small block
12. Supply gas to the blender and check for leaks and proper function.
F
G
! @
%
$
& *
q w
NOTE: The blender buddy is designed for use on the primary port (left side) of a blender.
The blender buddy has a 3 lpm continuous bleed built into the manifold of the device. When
properly installed on the left side of a blender the blender buddy's bleed ensures accuracy of
flow from the primary port at low flow rates, i.e. less than 3 lpm and is equal to the low flow
accuracy of the auxiliary port on the right side of the blender.
For use with the following models:
Bird® 3800 Microblender
•
Bird® Low Microblender
•
Bird® Omniblender
•
WWW .MAXTEC .COM • (800) 748-5355
B with the two long screws
A
I
H B
E
#
^
(
2.1 Flow meter options
C .
0 - 200 ccm Flowmeter (white) ..................................................................................... RP34P03-103
0 - 1 LPM Flowmeter (white)...........................................................................................RP34P03-104
0 - 8 LPM Flowmeter (white) .......................................................................................... RP34P03-105
0 - 15 LPM Flowmeter (white) ..........................................................................................RP34P03-101
0 - 70 LPM Flowmeter (white) ........................................................................................RP34P03-106
0 - 3.5 LPM Flowmeter (white) ....................................................................................... RP34P03-102
2 - 26 LPM Flowmeter (white) ........................................................................................RP34P03-108
D
0 - 5 LPM LPM Flowmeter (white) ..................................................................................RP34P03-109
0 - 200 ccm Flowmeter (green) .................................................................................... RP34P03-003
0 - 1 LPM Flowmeter (green) .........................................................................................RP34P03-004
0 - 8 LPM Flowmeter (green) ........................................................................................RP34P03-005
0 - 15 LPM Flowmeter (green) ........................................................................................RP34P03-001
0 - 70 LPM Flowmeter (green) ......................................................................................RP34P03-006
0 - 3.5 LPM Flowmeter (green) .....................................................................................RP34P03-002
2 - 26 LPM Flowmeter (green) ......................................................................................RP34P03-008
0 - 5 LPM Flowmeter (green) ........................................................................................RP34P03-009
3
ENGLISH