Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.4 Oven

The oven can be warmed up using the bottom
and top heaters. The operation of the oven is
controlled by the oven function knob .To set a
function you should turn the knob to the desired
position.
To select a temperature, use the temperature
regulator knob to set the desired temperature. You
can set the temperature within a range of 50-
250℃.
The oven can be switched off by setting both of
these knobs to position "0".
A signal light (orange) indicates that the oven is operating.
 The orange light indicates that the oven is heating.
 If the orange light goes off the oven has reached the temperature you preset.
 lf a recipe recommends to place dishes in a warmed-up oven, this should be not
done before the orange light has gone off for the first time.
 While the oven is operating, the orange light will go off and on temporarily to
maintain the preset temperature.
 The orange light indicates that the oven is operating. The orange light is also on,
when the interior light of the oven is switched on.
Functions of the oven
 interior light
 switches separately on the interior light of the oven, e.g.
for cleaning the oven inside.
 top heat on
 switches on the top heater of the oven, e.g. for final
backing from above.
 bottom heat on
 switches on the bottom heater of the oven, e.g. for final
backing from the bottom.
 top heat and bottom heat on
 allows the oven to be heated conventionally.
36

Publicité

Table des Matières
loading

Table des Matières