Before The First Use; Cleaning And Maintenance - Domo DO9227P Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
PARTS
1.
Heating plate
2.
Heating plate for 5 small pancakes
3.
Heating element
4.
Setting of temperature
5.
'On/off' and 'Ready to use' indicator light
6.
Base
7.
Spatula
8.
Batter spreader
8

BEFORE THE FIRST USE

·
Remove all packing materials and carefully clean the appliance and accessories before first use (see
Cleaning).
·
Attention: when using the appliance for the first time, the baking trays may emit a small amount of
smoke and odour. This is normal. Clean the appliance with absorbent paper or a clean, dry cloth to
remove any residue.
·
Apply a thin layer of vegetable oil to the baking tray. This will prevent sticking and cleaning after use
will be easier.
·
Place the unit preferably on a surface that is easy to clean. The surface should also be heat-resistant.
Do not place the appliance on an untreated wooden surface.
·
Make sure that there is enough ventilation around the grill.
·
Make sure that the grill is switched off. Plug into an earthed socket.
USE
This appliance gives you the choice between a heating plate with one large baking zone or a heating plate
with 5 small baking zones. Choose one of these heating plates and place it on top of the heating element.
1.
Plug the power cord into a socket. The red indicator light means the appliance is switched on.
2.
Slide the temperature setting to the desired position. This ranges from minimum 1 to maximum 5.
The appliance will start to heat up.
3.
When the indicator light turns green, the unit has reached the desired temperature.
4.
Pour the pancake batter over the baking zones with the ladle.
5.
Use the batter spreader to distribute the batter over the plate.
6.
Let the pancakes bake until they are cooked to your taste. Remove the pancakes with a wooden or
heat-resistant plastic spatula or scraper, so as not to damage the non-stick coating.
7.
After baking, slide the temperature setting back to 1 and unplug the plug from the socket. Allow the
appliance to cool down before cleaning.

CLEANING AND MAINTENANCE

·
Unplug the appliance before cleaning. Allow the appliance to cool down completely.
·
Wipe the appliance clean with a damp cloth. Make sure that no moisture or grease gets into the
ventilation holes. Then dry it well.
20
DO9227P
7
1
2
3
5
4
6

Publicité

Table des Matières
loading

Table des Matières