Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Unpack the heater and the accessories.
-Turn the radiator upside-down
-Fit the wheels assemblies onto the radiator by placing the U-shaped bolts between the
outermost fins on each side of the radiator.
-Please fit the wheel bases as the picture. Other position may affect the stability of the
radiator
-Securely fasten the wheels assemblies onto the radiator by screwing the wing nuts onto
the bolts
-Turn the radiator up right
Only operate the radiator in normal upright position with wheels assemblies
attached to the bottom.
Cable storage (refer to photo page 7 point F) must be at the lower part of
the product.
GB-8
Publicité
Table des Matières
