2 DESCRIPTION OF THE
APPLIANCE
1
2
3
4
This presentation is only for
information about the parts of the
appliance. Parts may vary according to the
appliance model.
1) Thermostat box
2) Refrigerator shelves
3) Crisper cover
4) Crispers
5) Bottle shelf
6) Door shelves
7) Egg holder
3 USING THE APPLIANCE
3.1 Thermostat Setting
7
The fridge thermostat automatically
regulates the temperature of the
compartment. Fridge temperatures can
be obtained by rotating the knob to higher
6
numbers, 1 to 5.
5
Thermostat Settings
• Set the knob to a low/medium position,
up to 3, for short-term storage of food in
the appliance.
• Set the knob to a medium position, 3 or
4, for long-term storage of food in the
appliance.
• For long-term storage of food in the
refrigerator, you can set knop maximum
position (4 - 5).
3.2 Temperature Settings Warnings
• The ambient temperature, temperature of
the freshly stored food and how often the
door is opened affects the temperature
in the fridge. If required, change the
temperature setting.
• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• When setting the thermostat, take into
consideration how often the appliance
door is opened and closed, how much
food is stored in the refrigerator, and the
environment in which the refrigerator is
located.
• When the appliance is first switched on,
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
EN - 26
Thermostat knob
Lamp cover