Bosch GAS 35 L AFC Professional Notice Originale page 16

OBJ_BUCH-1746-004.book Page 16 Friday, September 15, 2017 12:45 PM
16 | English
 Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Symbols and their meaning
CAUTION
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Vacuum cleaners of dust category L accord-
ing to IEC/EN 60335-2-69 for dry vacuum-
ing of materials with an exposition limit val-
3
ue > 1 mg/m that are hazardous to one's
health.
WARNING
that are hazardous to one's health. Have
the emptying and maintenance, incl. the
disposal of dust-collection containers,
carried out only by specialists. Appropri-
ate protective equipment is required. Do
not operate the vacuum cleaner without
the complete filter system. Otherwise
there is danger to your own health.
1 609 92A 3VZ | (15.9.17)
Symbols and their meaning
Read all safety warn-
ings and all instruc-
Min/Max
The vacuum cleaner
contains materials
AFC
Automatic Start/Stop feature
Extraction of dust resulting from running
power tools
The vacuum cleaner automatically switches
on and off with a time delay
Switching Off
Vacuuming
Vacuuming of deposited dust
Specification of the allowable load of the
connected power tool (country-specific)
Infinitely variable control of the vacuuming
power:
– Maximum vacuum capacity for applica-
tions with intense dust development
– Reduced vacuum capacity for applica-
tions with low dust development and for
control of the vacuuming power between
connected power tool and workpiece
surface (e. g. when sanding)
Automatic filter cleaning
(AFC = Automatic Filter Cleaning)
Attach only one L-Boxx (max.).
The weight of the L-Boxx with contents
must not exceed 15 kg.
Bosch Power Tools