Electrical Connection; Environmental Regulations; Exhaust Pipe - BORETTI 2007 Notice D'emploi

Consult the designs in the last pages referen-
ced in the text by alphabet letters.
Closely follow the instructions set out in this
manual.
All responsibility, for any eventual inconvenien-
ces, damages or fires caused by not comply-
ing with the instructions in this manual, is de-
clined.
Installation
The cooker hood must be placed at a minimum
distance of 65 cm from the cooking plane. If
the instructions for installation for the gas hob
specify a greater distance, this has to be ta-
ken into account. Do not tile, grout or silicone
this appliance to the wall. Surface mounting
only. Do not fix chimney flue to furniture or fly
over shelves unless the chimney flue can be
easily removed, in case maintenance is ever
required.
The exhaust hood must be connected to a
discharge duct with a diameter of at least 125
mm for models K and EK and at least 150 mm
for models KP, KV, EKP and EKV. Check care-
fully which model you have and whether the
diameter of your discharge duct is correct. This
is of great importance for the lifespan of your
exhaust hood.

Exhaust pipe

The exhaust hood includes a connection (B) on
top for the discharge of steam outdoors (di-
scharge duct not included). For models KP, KV,
EKP and EKV, no extra connection adapter is
included; for these models the discharge must
be connected directly to the motor housing.
In situations in which it is not possible to di-
scharge steam outdoors, the filter version of
the exhaust hood – F (recirculation) – can be
used in combination with carbon filters. The
filtered air is returned to the kitchen via the
openings on the side.
Cooker hoods 2007.indd 15

Electrical connection

The electrical tension must correspond to the
tension noted on the label placed inside the
cooker hood.
Environmental
Regulations
Should you wish to discard the machine for any
reason, please comply with the following:
Take the machine to the local authorized com-
pany that collects discarded household appli-
ances. Correct processing enable valuable ma-
terials to be recycled in an intelligent manner.
Before discarding your machine it is important
that you cut off the power supply cord and re-
move it together with the plug. This machine
has been accorded the appropriate mark in ac-
cordance with European Directive 2002/96EG
regarding discarded electric and electronic
equipment. This directive determines the
standards for the collection and recycling of
discarded equipment that apply to the entire
territory of the European Union.
NL
FR
ES
EN
15
19-11-2007 12:24:44