4
www.electrolux.com
glass.
If the supply cord is damaged, it must be replaced by
Ÿ
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
Ensure that the appliance is switched off before
Ÿ
replacing the lamp to avoid the possibility of electric
shock.
The handling of this device and of all other electrical
Ÿ
devices requires the observance of some basic rules
for your own safety as the following: don't expose the
device to any weather influence as rain, etc.
2.
SAFETY INSTRUCTION
2.1 Installation
Remove all the packaging.
Ÿ
Do not install or use a damaged appli-
Ÿ
ance.
Obey the installation instruction
Ÿ
supplied with the appliance.
Always be careful when you move the
Ÿ
appliance because it is heavy. Always
wear safety gloves.
Keep the minimum distance from the
Ÿ
WARNING!
During the switching on of the device high
temperatures can be reached around the lamp.
Please check the surface before you start working
there!
Don't put paper, cardboard, cloth, etc. between
device and fireproof covering board, as they might
catch fire.
During putting into operation insulation material
may emit corresponding smells.
WARNING!
Only a qualified person must
install this appliance.
other appliances and units.
Make sure that the appliance is
Ÿ
installed below and adjacent safe
structures.
The appliance can not be placed in a
Ÿ
niche of the ceiling or in a cavity.
2.2 Electrical connection
WARNING!
Risk of fire and electrical shock.
All electrical connections should be
Ÿ
made by a qualified electrician.
The appliance can not be placed in a
Ÿ