Electric Circuit Installation - Festo DAPZ−AR 0512a Notice D'utilisation

DAPZ−...−AR

Electric circuit installation

Please note
Drives with adjustable swivel angle:
S Adjust the valves and the rotary drive before you set the switching cam.
Setting the switching cam for the electric position feedback
For setting the switching points use adjusting tool 1.
S
The adjusting tool can be found in the cam shaft for setting the
lower switching cam (status when supplied from factory).
Pull the adjusting tool upwards out of the cam shaft.
S
Festo DAPZ−...−AR 0512a English
1
Fig. 20
31