Disconnecting The Battery Monitor; App; Installation; Use - AEG 97133 Mode D'emploi

Disconnecting The Battery Monitor

Caution!
When disconnecting the Battery Monitor cables,
make sure they do not come into contact with mov-
ing engine parts.
Be sure the engine is off before disconnecting the
Battery Monitor from the battery.
1. Release the hook-and-loop fastener from the
Battery Monitor housing.
2. Loosen the nut and washer.
3. Disconnect the negative cable from the negative
terminal.
4. Disconnect the cable lug (2).
5. Screw the washer and nut in place again.
Repeat these steps to disconnect the positive cable
from the positive terminal.

APP

Installation

1. Scan the QR code for the Battery Monitor. you
will automatically be redirected.
Or:
1. Download the app from Google Play or the App
Store. Enter "BM2" in the search field.
Install the app on your smartphone.

Use

Note:
unless blocked by external signals or shielding
objects, the smartphone can receive the Battery
Monitor signal from up to 10 metres away. The
signal will be affected at more than 10 metres away
or if objects are in the way.
1. Enable Bluetooth on your smartphone.
2. Allow receiving notifications, including car bat-
tery, cranking system, and the charging system,
along with problem alerts.
Note:
When disabling notifications you will not be able to
receive the respective notifications. When permit-
ted, the smartphone will be notified when within
Bluetooth range, even without starting the app.
3. Tap the app icon and open the app.
4. Grant the app access to the location, including
when the app is not being used.
Note:
With the location disabled the Battery Monitor will
not be able to send the user an alert if a problem
occurs.
English 21