VINCENT CD-S1.2 Manuel D'utilisation page 32

13
13. AUDIO OUTPUTS:
analogue audio signal outputs
Either one of the RCA connector pairs or the XLR
sockets are connected to the relevant input of the
amplifier, preamplifier etc. It is not necessary to
also connect one of the digital signal outputs (14).
14. DIGITAL OUTPUT COAXIAL
If the amplifier, receiver or preamplifier is equip-
ped with a coaxial digital input connector, the
relevant CD player signal output may be connec-
ted to this. It is not necessary to connect an ana-
logue (13) and a digital signal output (14) at the
same time.
15. FUSE: Fuse holder
This small plastic housing holds the fuse. Refer to
the security precautions.
Vincent Vincent
32 32
REAR VIEW
14 17
16. AC: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitab-
le wall outlet.
17. DIGITAL IN:
USB: Input connector
Connect your PC, laptop etc. here using the
provided USB cable
Connections for audio signals of
source devices
with digital sound such as, for example, DVD
players. "Optical" for optical fibre connecti-
on and "Coaxial" for connection via coaxial
cable.
18. POWER CONTROL (12V): ON/OFF control
These jack connectors (3.5 mm) receive and for-
ward the signal for the standby control (12V
Trigger).
18 15 16