Futurelight PHS-260 Pro-Head-Spot Mode D'emploi page 56

- Fixture running time
With this function you can display the running time of the device.
• Select "MATI" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"XXXX", "X" stands for the number of hours.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
• Select "LATI" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"XXXX", "X" stands for the number of hours.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Clear lamp time
• With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select "CLLT" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows "ON" or "OFF".
• Press [UP] or [DN] to select "ON" if you wish to enable this function or "OFF" if you don't.
• Press [MODE/ENTER] to confirm.
• Press [EXIT] in order to return to the main menu.
- Main menu 5
• Press [MODE/ENTER] to enter the main menu (display flashing).
• Press [UP] to select "EDIT".
- Define the number of steps in Run
With this function you can define the number of steps in the
Program Run.
• Select "STEP" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"S-XX", "X" stands for
the total amount of steps you want to save, so you can call up to
48 scenes in "RUN". For example if the "XX" is 05, it means that
"RUN" will run the first 5 scenes you saved in "EDIT".
• Press [MODE/ENTER] to save and exit.
- Auto scenes rec
With this function you can automatically record new scenes.
• Select "REC" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows"RE-XX", "X" stands
for the total amount of memorizable scenes, you can call up in
"RUN". For example if the "XX" is 05, it means that "RUN" will
run the first 5 scenes you saved in "EDIT".
• Press [MODE/ENTER] to save and exit.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up in
Run.
a) Editing via the Control Board
• Select "SC01" by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows "SCXX", "X" stands
for the scene no. to be edited.
• Change the scene no. by pressing [UP] or [DN].
• Press [MODE/ENTER], the display shows "C-XX", "XX" stands
for the channel no. Such as "C-01", it means you are editing
channel 1 of the selected scene.
• Select the channel no. you would like to edit by pressing [UP].
56/116 00041987.DOC, Version 1.0