Publicité
Les langues disponibles
Les langues disponibles
Symptom
Receiver doesn't work.
No audio signals being
received.
The audio transmission is
of poor quality, noisy, dis-
torted, unclear or no audio
signals being received.
Battery pack no longer
gives the expected oper-
ating time per charge.
Cause
The
receiver
switched on.
(RadioLight LR II)
No battery is inserted into
the receiver.
Battery is discharged.
You are too far away with
your receiver from the
transmitter.
If using a 100 Hz televi-
sion and the transmitter
is placed on top of it the
sound may become dis-
torted in the receiver.
Battery is discharged.
Battery pack is not fully
charged.
Battery pack has reached
its recharging limit.
Solution
is
not
Use the ON/OFF switch on
the back of the receiver to
switch the device on.
(RadioLight LR II)
Insert a battery into the
receiver.
Replace battery with a
fully charged one.
Make sure you are not lo-
cated too far away from
your transmitter.
Move the transmitter to a
position where the distor-
tion does not occur.
Recharge the battery for
the correct time.
Replace battery with a fully
charged one.
Replace battery pack with
new one.
English 19
Publicité
