HumanTechnik RadioLight DIR II Mode D'emploi page 15

RadioLight DIR II
6
Volume control
RadioLight LR II
Volume control
Using the 3.5 mm stereo output jack
The following accessories can be connected to the 3.5 mm stereo jack:
- Under-the-chin receiver, open system
- Under-the-chin receiver, closed system
- Earphone, inconspicuous design
- Lightweight headphones, conventional design
- Induction plate: monaural
- Induction plate: binaural
- Monaural Euro cable, damped
- Binaural Euro cable, damped
As soon as you no longer need to use the product, make sure to unplug
any accessory you may have connected to the 3.5 mm stereo jack and flip
the switch on the back of the receiver to "OFF".
Volume adjustment of the receiver.
There is no ON/OFF switch.
The receiver automatically switches on when
worn. The stethoscope headset will switch
off automatically when you remove it.
Using the teleloop
Switch the receiver on and set your hearing
aid to inductive reception.
Now you can adjust the volume by turning
the knob to any position between 1 and 5
(Fig.: Volume control).
- 1 means lowest volume
- 5 means highest volume
English 15