HumanTechnik RadioLight DIR II Mode D'emploi page 13

How it works
3
Fig. Transmitter with
RadioLight DIR II
Charging
control light
Fig. RadioLight LR II
Dummy
Standby
indicator
Induction
loop fastener
3.5 mm
stereo jack
When you first charge the battery
packs for the headset receiver, char-
ge them for at least 6 hours.
Only use original battery packs.
The package includes two battery
packs and one dummy. You will reco-
gnize the dummy as it has no metal
contact surfaces.
Standby indicator:
The blue LED indicates that the de-
vice has established a connection
with the audio source and is on Send.
Charging control light:
Red LED = Battery is in the batte-
ry recharger and is in
the process of being
recharged
Green LED = Battery is fully rechar-
ged
The induction loop fastener makes it
easy to put on the device and mini-
mizes the risk of accidents.
The ON/OFF switch on the back
panel of the receiver is used to
switch the receiver on and off.
Important: Always make sure to
switch the receiver off when you've
finished using it. Otherwise, the bat-
tery will run down.
English 13