Venmar VBLDN1 Manuel D'installation, D'utilisation Et D'entretien page 6

DELAY OFF
When the blowers are on, press this button to activate the delay function. This icon appears on LCD
screen beside the blower icon to indicate the function is on. The blowers will continue to operate for
10 minutes and then, will shut off automatically (both blower and delay icons will disappear from
LCD screen). When Delay off is activated, it is possible to change the blower speed by pressing on
blower push button without affecting the remaining time of the delay.
To cancel the delay off function before the end of the 10-minute cycle, press again on delay off
push button.
ON LIGHTING/LIGHT INTENSITY CHANGE
Press this push button to turn on the lights at the last saved intensity; the light icon appears on right
side of LCD screen and the number of dots below it shows which light intensity is on (one dot for
LOW, two dots for MEDIUM and three dots for HIGH).
To change the light intensity, press the push button until the desired level is reached (from HIGH
intensity, pressing again will shut off the lights).
When lights are on (no matter the light intensity), press and hold this push button until the light icon
disappears from the LCD screen; this will shut off the lights and save the chosen light intensity.
The LED modules included with this hood are the latest in LED cooktop illumination technology
specially designed to operate in the elevated temperatures of cooking - offering bright lighting and
lasting up to 25 times as long as a standard bulb and greater reliability than typical replacement
LED bulbs.
MASTER ON/OFF
Press this push button to turn on the ligths and the blowers at the last saved intensity. When either
lights or blowers are ON, pressing on this push button will memorize the current blower speed and
lighting level prior to shut them OFF.
6