Mounting The Wheels - Hama Racemachine Mode D'emploi

8. Car mode

8.1 Mounting the wheels

13
Move the slide switch
(6) on the drone to the
position of the car symbol.
• Undo the nut of the
rotor blade with the
included socket wrench.
• Remove the rotor blade.
• Undo the locking on the
underside of the rotor/
wheel fastening.
• Flip the mount of the
rotor blade 90° upwards
until it engages on the
landing/standing legs
(3).
• Place the wheel on the
mount.
• Make sure that you
position the wheel as
shown in the adjacent
picture.
• Press the wheel onto the
mount until it clicks into
place.
• Make sure that the
two lugs of the wheel
engage.
• Fasten the wheel by
tightening the nut with
the included socket
wrench.
8.2 Car control
Travel forwards/backwards
• To travel forwards with the car, move the left control
lever (2) on the remote control upwards.
• To travel backwards with the car, move the left control
lever (2) on the remote control downwards.
Travel left/right
• To travel left with the car, move the right control lever
(9) on the remote control to the left.
• To travel right with the car, move the right control
lever (9) on the remote control to the right.
Left control
Left control
Right control
Right control