Using Your Television - Insignia NS-RTV32 Guide D'utilisateur

3 Press or to select the SETUP menu,
then press or
4 Press or . The ADD/DELETE menu
appears.
5 Press or
CHANNEL, then press
6 Press EXIT to return to the normal screen.
7 Repeat step 1-6 for other digital channels you
want to add.
Using clear all
All channels can be deleted from the channel
memory.
To clear all channels from memory:
1 Press MENU. The menu screen appears.
2 Press or to select the SETUP menu,
then press or
3 Press or . The ADD/DELETE menu
appears.
4 Press or
press or .

Using your television

Notes • If you select a channel with no
broadcast signal, the sound is
automatically muted.
• If a station you are viewing stops
broadcasting, the television
automatically shuts itself off after 15
minutes.
To use the television:
1 Press POWER to turn on the television.
2 Adjust the volume level by pressing VOL +
or –. The volume level is indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.
3 Set the TV/CABLE menu option to the
appropriate position (see "Selecting TV or
cable" on page 9).
4 Press the direct channel selection buttons to
select the channel.
Selecting analog channels
Channels Press
1-9 Press 0 twice, then 1-9 as needed.
Example: to select channel 2, press
0 0 2.
10-99 Press 0, then the remaining 2 digits.
Example, to select channel 12, press
0 1 2.
100-125 Press the 3 digits in order. Example,
to select channel 120, press 1 2 0.
Selecting digital channels
Press the first 3 digits, then press the
–/DISPLAY button, followed by the remaining
3 digits.
Example, to select channel 015-001, press 0 1 5
– 0 0 1.
10
to select ADD/DELETE.
to select ADDING
or .
to select ADD/DELETE.
to select CLEAR ALL, then
www.insignia-products.com
NS-RTV32 32-inch MTS Stereo Color TV
Note the following:
• If a channel is selected with only audio
content, "AUDIO ONLY" will be displayed on
the screen.
• If a channel is selected with a weak digital
signal, "DIGITAL CHANNEL SIGNAL
STRENGTH IS LOW" will be displayed on the
screen.
• If a channel is selected to which you have not
subscribed, "DIGITAL CHANNEL IS
SCRAMBLED" will be displayed on the
screen.
TV Cable
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
Seeking channels
To seek the next channel:
Press and release CH
automatically stops at the next channel set into
memory.
For proper operation, before seeking channels,
they should be set into the memory. See
"Memorizing channels" on page 9.
Viewing information
Note The screen automatically returns to normal
TV operation after 10 seconds.
To view program information:
1 Press -/DISPLAY to display the current
information on the screen.
When the television receives a digital signal,
the digital information appears:
• Broadcast program name
• Station name
• Remaining time
• Audio language
• Program name
• V-Chip rating
• V-Chip mark
• Closed caption mark
When the television receives an analog
signal, -/DISPLAY shows only analog
information.
2 Press -/DISPLAY again. The analog
information appears.
• Clock
• Channel number or video mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program)
audio status
• Content rating
or . The channel