Use; Control Panel; Operating Mode Selector - poolstar POOLEX PICO 3 Manuel D'installation Et D'utilisation

4.1

Control panel

3
4
To lock or unlock the control panel, press
4.2

Operating mode selector

Before starting, ensure that the filtration pump is working and that water is circulating
through the heat pump.
Prior to setting your required temperature, you must first select an operating mode for your remote
control:
12 | EN

4. Use

5
1
6
2
+
Heating Mode
Select the heating mode for the heat pump to heat the water in
your pool.
Cooling Mode (only for Pico R)
Select the cooling mode for the heat pump to cool the water in
your pool.
1. Cooling/Defrost mode indicator
2. Heating mode indicator
3. ON/OFF button
4. Mode button
5. Plus (+) button
6. Minus (-) button
3s.