Safety Instructions - Haussmann Xpert PT112602 Guide De L'utilisateur

SAFETY INSTRUCTIONS

1) Work area safety
a、Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b、Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c、Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
1. The charger's plug must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
2. Use this battery-operated tool only with its specifically designated battery
pack. The use of any other batteries may create a risk of fire.
3. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
4. A battery-operated tool with integral batteries or a separate battery pack
must be recharged only with the specified charger for the battery. A
charger that may be suitable for one type of battery may create a risk of fire
when used with another battery.
3) Personal safety
a、Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b、Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c、Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d、Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal
injury.
e、Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f、Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g、If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
16