MAC Audio MPS 501 Mode D'emploi page 28

Selecting and saving stations manually
• Hint: Before beginning to tune in stations manually, obtain the available DAB / DAB+ stations
channel / frequency information for your area.
• Switch on the appliance.
• Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode. [FULL SCAN] is shown in the display.
• Press the TUNE- / TUNE+ buttons until [MANUAL] is shown in the display. Press
• Now you will see 5A 174.928MHz in the display.
• Press the TUNE- / TUNE+ buttons to display a particular channel / frequency, the display will
show the channels from SA to 13F and the associated frequencies.
• When the desired channel is displayed, press the
displayed. To add the channel, press the
• Add additional channels in the same way and then press the MENU button to exit manual
tuning mode.
• The radio will return to the first station and the new stations will be added.
• Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
Note: Up to 30 stations can be saved.
Auto-scan and store preset stations
• Switch on the appliance.
• Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode.
• Press the MENU button. [FULL SCAN] is shown in the display.
• Press the button and the unit starts scanning DAB / DAB+ stations around your area.
Scanning O is shown in the display.
• Once the scan is completed, the radio returns to play the previously-selected station or first
station on the station list.
• Use the TUNE- / TUNE+ buttons to move through the stations available and press the
button to listen to the station.
Reset DAB Settings
• Switch on the appliance.
• Press SOURCE button on the remote control or SOURCE button on the appliance repeatedly
to choose DAB mode.
• Press the MENU button. [FULL SCAN] is shown in the display.
• Presses the TUNE- / TUNE+ buttons repeatedly until [SYSTEM] is displayed then press the
button to confirm, now [RESET] will be displayed.
Reset DAB settings
• Press the button [RESET N] will be displayed, use the TUNE- / TUNE+ buttons to toggle to
[RESET Y] and then press the
• Once the reset is completed, the unit will then automatically perform a full scan. All stored
stations will be lost during reset.
button again.
button to start the reset process.
28
button and the signal strength will be
to confirm.