MAC Audio MPS 501 Mode D'emploi page 27

FUNCTIONS OF THE MPS 501
Display brightness
In operation mode or in standby mode press the DIMMER button repeatedly to select the display
brightness. Three brightness steps can be adjusted, dark, mid and bright.
DAB / DAB+ tuner operation
The unit is able to receive available DAB and DAB+ radio stations in your area.
BT
Activates the input source Bluetooth.
Search for new Bluetooth sources with your phone or tablet. You will find the
MAC AUDIO MPS 501. Connect your device with the MAC AUDIO MPS 501. If you are asked for a
password, use "0000".
DAB OVERVIEW
Buttons / Commands
TUNE- / TUNE+
MENU
FULL SCAN
MANUAL
DRC
PRUNE
SYSTEM
Function
Press to select / display option item.
Press to enter or exit menu mode.
Press to confirm selection.
A full scan of DAB / DAB+ radio stations in your area. Once the
scan is completed, the radio returns to play the previously
selected station or first station on the station list.
Manual tune to a particular channel / frequency.
The DRC (Dynamic range compression) function reduces
louder and loud sounds comparatively quieter. The difference
between the loudest and quietest audio being broadcasted.
Effectively,
this makes quiet sounds comparatively.
Note: DRC only works if it is enabled by the broadcaster for a
front of the station name.
This function removes all invalid stations.
Note: Invalid stations are indicated in the station list by a ? in
front of the station name.
Factory Reset
Y or N option. Select Y to initiate reset to factory settings and
confirm with button.
Installation of an update
Option Y (yes) or N (no), if a software update is to be manually
installed.
SW VER: Software version.
27