Wolf Gourmet 800.222.7820 Guide D'utilisation page 5

SAFETY PRECAUTIONS
IMPORTANT SAFEGUARDS continued
When blending hot liquids or ingredients, remove center emulsion cap
•
assembly from the lid. Use caution: spray or excess steaming may cause
scalding and burns. Do not exceed the 6-cup (1420-ml) level. Always begin
processing on lowest speed. Keep hands and other exposed skin from the lid
opening to prevent possible burns.
Ensure cutter assembly is tight and secure to jar. Injury can result if moving
•
blades accidentally become exposed.
If the jar should twist or rotate when the motor is switched ON, switch OFF ( )
•
immediately and tighten jar in collar or on blender base.
Do not leave blender unattended while it is operating.
•
Check that the appliance is OFF ( ) before plugging cord into wall outlet. To
•
disconnect, turn the control to OFF ( ); then remove plug from wall outlet.
To unplug, grasp the plug and pull from the outlet. Never pull from the power
cord.
Do not use appliance for other than intended purpose.
•
CAUTION! In order to avoid a hazard due to inadvertent resetting of the
•
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
Be careful if hot liquid is poured into the blender container as it can be ejected
•
out of the appliance due to a sudden steaming.
SAVE THESE INSTRUCTIONS
wolfgourmet.com
|
5