JVC KW-V40BT Mode D'emploi page 46

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connection
Connecting wires to terminals
See page 47.
USB terminal: See
page 47.
Connect the aerial cord
to the aerial terminal.
1
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
46
REVERSE
See page 47.*
GEAR
SIGNAL
PARKING
BRAKE
10 A fuse
Connecting the ISO connectors
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Default wiring
Connect to the vehicle's reverse lamp harness when
Purple with white stripe
using the optional rear view camera.
(Reverse sensor wire)
Light green
(Parking sensor wire)
3
* Only for KW-V40BT/KW-V20BT.
To the OE remote adapter matching your car
• If no connections are made, do not let the cable come out from the tab.
Pin Color and functions of Connector A and B
A4 Yellow
A5 Blue with white stripe
A6 Orange with white stripe Dimmer
A7 Red
Red (A7)
A8 Black
Vehicle
B1 Purple
Yellow (A4)
B2 Purple with black stripe
B3 Gray
B4 Gray with black stripe
B5 White
B6 White with black stripe
B7 Green
B8 Green with black stripe
Connect to the vehicle's parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Battery
Power control
Ignition (ACC)
Ground connection
Right speaker ª (rear)
Right speaker · (rear)
Right speaker ª (front)
Right speaker · (front)
Left speaker ª (front)
Left speaker · (front)
Left speaker ª (rear)
Left speaker · (rear)