Mains Input - T+A P 1230 R Mode D'emploi

RC-IN (E 2000)
Input socket for the E 2000 remote control receiver.
R
LINK
Control output for  devices with R inputs.
LINK
RC-OUT
Control outputs for older  devices without R
LINK
inputs.
CTRL OUT
(only P 1230 R)
Control output for  power amplifiers without an
R input.
LINK

Mains input

This socket is for mains connection and contains the main
fuse. The fuse should only be replaced with another fuse
rated at the values printed on the amplifier.
For correct connection refer to the sections
'INSTALLATION AND WIRING' and 'SAFETY NOTES'.
36