Hama 00184093 Mode D'emploi page 5

Note – Bluetooth
Some terminal devices require a password in order to connect to another Bluetooth
• If your terminal device requests a password to establish the connection, enter 0000, 1234,
1111 or 8888.
Note
• If pairing was successful, the status LED (3) lights up in blue.
• You can now use the adapter.
5.3. Bluetooth pairing in transmitter (TX) mode
®
Note – Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your terminal device.
• Connect your terminal device to the adapter using the included 3.5 mm jack cable and the audio
connection (AUX) (4).
• Select the adapter's TX mode by moving the switch (1) to the left.
• Turn on Bluetooth
• For more information, please refer to the operating instructions of your terminal device.
• The adapter and the Bluetooth
The shorter the distance, the better.
• With the adapter on, press the multifunction button (2) twice. After approximately 3 seconds, the
status LED (3) will emit flashes of blue light to indicate the device is in pairing mode.
• The connection is now established automatically.
5.4. Automatic Bluetooth
Note – Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your terminal device.
• Make sure that the adapter is on.
• After the devices have been paired once, the connection is then established automatically.
• You can now use the adapter.
Note
• If pairing was successful, the status LED (3) will be lit blue.
• It may be necessary to make settings on your terminal device to enable automatic connection
to the paired adapter.
4
® password
-capable terminal device is on and Bluetooth
®
® on your Bluetooth
headphones/speaker should be no further than 10 metres apart.
®
® connection (after successful pairing)
-capable terminal device is on and Bluetooth
®
® headphones/speaker.
device.
®
is activated.
®
is activated.
®