Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Talis S 80 72017000 Mode D'emploi / Instructions De Montage

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.

Technical Data

This mixer series-produced with EcoSmart
(flow limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
The product is exclusively designed for drinking water!
4
®
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Assembly (see page 31)
English

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 34)
Flow diagram (see page 34)


Spare parts (see page 35)
Special accessories
(order as an extra)
seal #98996000 (see page 31)
Operation (see page 33)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Cleaning (see page 36)
Test certificate (see page 33)
with EcoSmart
®
without EcoSmart ®