Play Music On The Pc; Optical Input Mode - AIRPULSE A 80 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USB Input Mode
For Mac users, please open "System Preferences" → "Sound" → "Output"Tab to
select "AIRPULSE A80"as the current audio output device.

Play music on the PC

Play music on the connected device, press the "+/-" button on the remote control
or press the "VOLUME / INPUT" button on the rear panel of the active speaker to
adjust volume to a desired level.
Or
VOLUME / INPUT
* The play control under USB input belongs to USB HID control. This control needs support
of player software,and so there may be compatibility differences for different audio
player software.
* USB driver in Mac operating system supports USB Audio Class 1 and Class 2 audio
transmission by default, therefore driver program installtaion is not needed.
* Windows 7/ windows 10 operating system have self USB driver, only support USB Audio
Class 1 type USB audio transmission (only support 2 channel audio signal, the highest
sampling rate is 96KHz), The USB connecting chip of A80 uses USB Audio Class 2 type
audio transmission to support 192KHz audio signal, so for Windows 7/ windows 10
operating system users, using the A80 speaker needs to download the special driver
program.
* When USB input is disconnected or in other modes, please reset on the PC to re-select
USB input. Please see "Set this device as the audio output device of PC" for details.
* As Microsoft Company had stopped maintaining the XP system, we can't provide the
driver program with Microsoft digital signed.
* If you need to buy USB A type to B type connecting cable, you can search and buy it
on the various e-commerce platforms.
15
English
AIRPULSE A80
VOLUME / INPUT

Optical Input Mode

1. Connect this product to audio source device with optical digital output port using
fiber optic input audio cable.
2. Press the "OPT" button on the remote control or press the "VOLUME / INPUT"
button on the rear panel of the active speaker to select optical input mode, LED
indicator on the active speaker will display "OPT".
Or
VOLUME / INPUT
3. Play music on the connected device, press the "+/-" button on the remote control
or press the "VOLUME / INPUT" button on the rear panel of the active speaker to
adjust volume to a desired level.
Or
VOLUME / INPUT
* Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in
optical mode.
* If the optical digital output of playing device is ACC, such as on a TV, please switch
it to PCM.
Set Top Box/Blu-ray player
VOLUME / INPUT
OPT
VOLUME / INPUT
English
16

Publicité

Chapitres

Table des Matières
loading

Table des Matières