Aux Input Mode; Pc Input Mode - AIRPULSE A 80 Mode D'emploi

AUX Input Mode

1. Insert RCA audio cable into AUX input port on the rear panel of the active speaker
(pay attention to L/R connector matching); then connect RCA audio cable to audio
source devices with RCA output port (CD player/audio decoder/PC/music player/
mobile phone).
2. Press the "AUX" button on the remote control or press the "VOLUME / INPUT" button
on the rear panel of the active speaker to select AUX input mode, LED indicator on the
active speaker will display "AUX".
Or
3. Play music on the connected device, press the "+/-" button on the remote control or
press the "VOLUME / INPUT" button on the rear panel of the active speaker to adjust
volume to a desired level.
Or
11
English
CD player
CD player/audio decoder, etc
PC/music player/mobile phone, etc
VOLUME / INPUT
AUX
VOLUME / INPUT
VOLUME / INPUT
VOLUME / INPUT

PC Input Mode

1. Insert RCA audio cable into PC input port on the rear panel of the active speaker (pay
attention to L/R port matching); then connect RCA audio cable to audio source devices
with 3.5mm audio output jack or RCA output port (PC/music player/mobile phone).
2. Press the "PC" button on the remote control or press the "VOLUME / INPUT" button
on the rear panel of the active speaker to select PC input mode, LED indicator on the
active speaker will display "PC".
Or
VOLUME / INPUT
3. Play music on the connected device, press the "+/-" button on the remote control or
press the "VOLUME / INPUT" button on the rear panel of the active speaker to adjust
volume to a desired level.
Or
PC or Mac
VOLUME / INPUT
PC
VOLUME / INPUT
VOLUME / INPUT
12
English