AIRPULSE A 80 Mode D'emploi page 4

Box Contents
Active speaker
Passive speaker
3.5mm to RCA audio cable
RCA audio cable
Speaker connecting cable
USB connecting cable
Fiber optic input audio cable
Power cable
5
English
Remote control
User manual
Speaker Illustration
1. Volume control/input selection
Volume control
Rotate clockwise to increase volume; rotate
counter clockwise to reduce volume.
When reaching maximum volume level,
continue to rotate volume control will not
change volume.
Input selection
Press to switch between PC–AUX–USB–
Optical–Bluetooth modes.
(As DSP will be reconfigured when input
mode is switched, it is recommended to
press after the current mode indicator
flashes once.)
Standby control
Press and hold to alternate between Power
on and Stand by mode.
2. Bass level adjustment
Room acoustics may dictate which type of
adjustment you need to make to retain the
proper frequency response from the speaker.
Turn from "0" to left to reduce low frequencies;
Turn from "0" to right to increase low
frequencies.
3. Treble level adjustment
Room acoustics may dictate which type of
adjustment you need to make to retain the
proper frequency response from the speaker.
Turn from "0" to left to reduce high frequencies;
Turn from "0" to right to increase high
frequencies.
4. Power switch
Turn on/off speaker power.
5. AC input socket
Connect to plug of power cord.
6. Auxiliary input port
Connect to audio source devices with
RCA output port using RCA audio cable.
7. PC input port
Connect to PC using 3.5mm to RCA audio
cable, or connect to audio source devices
with RCA output port using RCA audio cable.
8. USB B type port
Connect to audio source devices with
USB output port using USB connecting cable.
9. Optical input port
Connect to audio source devices with
optical output port using fiber optic
input audio cable.
10. Subwoofer output port
Connect to audio input port of subwoofer
using RCA audio cable.
11. Passive speaker connector
Connect to passive speaker using speaker
connecting cable.
12. Active speaker connector
Connect to active speaker using speaker
connecting cable.
13. LED indicator/remote control receiving
window
Indicates current input mode based on
audio sources and input selection.
English
6