Digital Inputs - VINCENT DAC-1 MK Manuel D'utilisation

5

5. Digital Inputs

You can connect your digital source on those
inputs via USB, Optical or coaxial.
6. ANALOG OUTPUT:
analogue audio signal outputs
Either the RCA connector pair or the XLR sockets
("BALANCED") must be connected to the mat-
ching input of the amplifier, preamplifier etc.
7. POWER CONTROL (12V)
These jack connectors (3.5 mm) send the signals
for the standby control (12V Trigger).
Vincent
26
REAR VIEW
6
8. Voltage Selector:
The voltage selector behind the panel allows swit-
ching the voltage from 230 V to 110 V.
Refer to safety instructions for further information
(p. 28, "Switching the Voltage")
9. AC 220-240V: Power Connector
To establish the power supply, connect the plugs
of the power cable to the device and to a suitable
wall outlet.
7 8 9