Sefa DUPLEX MINI PRO Manuel Utilisateur page 10

2021-03-25
d� Operating cycle
1.
2.
3.
4.
5.
6.
7.
8.
Depressing the pedal or one of the green push buttons during a cycle will stop the cy-
cle and move the swing arm to the other side.
Pressing the on-screen stop button during a cycle will stop the cycle.
10
Place the work item on the lower platen.
Position the transfer sheet correctly.
Depress the cycle start pedal. The swing arm will move into place over
the platen, the heat platen will lower and the press timer will start.
Use this time to prepare the next work item and transfer sheet on the
second workstation.
The heat platen will lift open when the timer has finished.
Depress the pedal if the machine is not in «FULL AUTO» mode. If the
machine is operating in Full Auto mode, the platen will swing away
automatically after it has lifted clear and the post-press timer has
finished its countdown.
Remove the work item from the first workstation and get the next one
ready.
Repeat from step three above.
www.sefa.fr