Télécharger Imprimer la page

GE GTH21 Série Manuel D'utilisation Et D'installation page 24

Publicité

Les langues disponibles

Les langues disponibles

REVERSING THE DOOR SWING
REVERSING DOOR HANDLES –
7
TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
SIDE OF THE FREEZER DOOR
1. Remove the two screws
securing the top end of
the handle with a Phillips
screwdriver.
2. Rotate the
handle out
and lift off of
the mounting
screw on the
refrigerator
door.
3. Remove the mounting
screw from the surface
of the refrigerator
door.
Installation Instructions
24
(CONT.)
REVERSING DOOR HANDLES –
7
TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
SIDE OF THE FREEZER DOOR
(CONT.)
4. Insert the mounting screw
into the surface of the right
side of the freezer door
with a Phillips screwdriver.
5. Align the handle with
the mounting screw.
6. Rotate the handle.
7. Secure the bottom end
of the handle by inserting
two screws and tightening
them with a Phillips
screwdriver.
NOTE: Do not over-tighten.

Publicité

loading