Section Three: Programming - Orbit WaterMaster 57096 Manuel De L'utilisateur

ENGLISH
To help you visualize how best to program the Timer, it might be helpful to
make a watering plan on paper. This will help you establish which days
and times you want to water.
SECTION THREE
Programming
The Timer has two programs you can setup to control a variety of water-
ing plans. Depending on your needs, you can use either or both programs.
Enter the Watering Schedule in Any Order
You have the option of entering your watering schedule in whatever order
you like. This feature makes it very easy to review and change your water-
ing schedule. Your settings can be changed at any time—while you're set-
ting up the initial schedule, or after years of operation.
Start Times for Program A or B
Note: A start time is the time of day that the program begins watering the
first station, and all other stations will then follow in sequence. There are
not separate start times for each station. Start times do not correspond to
specific stations. If you enter more than one start time, all stations pro-
grammed to operate will water again (in sequence).
• The way you set the start time is the same for both programs.Turn the
rotary dial to the Start Times position in the program that you want to
set up. The display will show an A or B depending on which program
you have selected.
The display will show – – :– –, and a blinking cursor in S
[See Figure 5].
• Set the time you want to begin watering for start time 1 using the +
4
or – keys, then press the
S
TART
using the + and – keys to enter the time, then press
Remember, Each start time will activate all stations that are programmed
to operate. There are not separate start times for each station. Start times
do not correspond to specific stations.
Figure 5: LCD
Watering Durations for Program A or B
Note: Both programs require watering durations to be programmed.
• Turn the rotary dial to the Station Duration position in either the A or
B program. The display will show which program you have select-
ed with an "A" or "B" and the - - MINS and the cursor blinking at
1 location station "1" [See Figure 6].
TART
key. The display will advance to
ENTER
2. For additional start times, simply repeat this procedure by
Display with Start Time
.
ENTER