JVC KD-A735BT Manuel D'instructions page 25

Menu item
USB *9
IPOD SWITCH *10
(iPod/iPhone control)
AUDIOBOOKS *10
PHONE *12
AUDIO
APPLICATION
BT AUDIO SW *13
DELETE PAIR
P. BOOK WAIT
SET PINCODE
AUTO CNNCT
INITIALIZE
INFORMATION
AM *15
EXT IN *15
AUX IN *15
BT AUDIO *16
SOFT VER
*9 Displayed only when the source is "USB FRONT/USB REAR".
*10 Displayed only when the source is "IPOD-FRONT/IPOD-REAR".
*11 If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER" scrolls
on the display.
*12 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time.
*13 Displayed only when the source is "BT FRONT/BT REAR".
*14 Displayed only when a Bluetooth phone/audio player/application is connected.
*15 Displayed only when the unit is in any source other than the corresponding source "AM/EXT IN/AUX IN".
*16 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not "BT FRONT/ BT REAR".
Selectable setting (Initial: [XX])
DRIVECHANGE: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal (front/rear).
[HEAD MODE]/IPOD MODE/APP MODE:
For settings, page 11.
NORMAL/FASTER/SLOWER: Selects the playback speed of the
Audiobooks sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/
audio device. ( page 15)
CONNECT/DISCONNECT: Connects or disconnects the application in the
smart phone. ( page 16)
Switches between "BT AUDIO" and "BT PANDORA".
For settings, page 16.
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
position. After entering the PIN code, press the control dial to confirm.
[ON]: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
OFF: Cancels.
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
[NO]: Cancels.
PH CNNT DEV/AU CNNT DEV/APP CNT DEV *14: Displays connected
phone/audio/application device name.
MY BT NAME: Displays the unit name (JVC Unit).
MY ADDRESS: Shows address of USB Bluetooth Adapter.
[ON]/OFF: Enables or disables "AM" in source selection.
EXT ON/[EXT OFF]: Enables or disables "EXT IN" in source selection.
[AUX ON]/AUX OFF: Enables or disables "AUX IN" in source selection.
[BT AU ON]/BT AU OFF: Enables or disables "BT AUDIO" in source
selection.
Displays the firmware version of the unit.
Menu operations
/ to move to the entry
ENGLISH | 25