Hang The Ceiling Fan - Fanelite 60YFA-1002 OURAGAN Mode D'emploi

3/ INSTALL THE BLADES
Assemble the blades with their supports using the screws and washers provided. Caution, tighten the screws
carefully to avoid damaging the blades.
Remove the plastic stoppers from the motor and throw it away.
Position each blade / blade support assembly on the motor (the screws and washers can already be
pre-mounted on the motor) and tighten the screws. Make sure it is properly tightened to avoid excessive
vibration problems during start-up.

9. HANG THE CEILING FAN

1/ HANG THE CEILING FAN IN THE HANGER BRACKET
Take your ceiling fan and put the black hanger ball at the top of the tube into the hanger bracket.
Turn the tube until the hanger ball locks into the hanger bracket (concave groove of hanger ball into the lugs
of hanger bracket).
Be careful to not damage the electrical wires and not pinch them between hanger ball and hanger bracket.
25