7. FIX THE CEILING SUPPORT
WARNING : The fixing must be done securely in the structure of the ceiling by a qualified person.
Depending on the structure of your ceiling, use suitable screws and washers. Do not fix the ceiling
support in a structure thinner than 50 mm or in hollow elements, in order to avoid any risk of falling.
Make sure that the fixing is very solid and can support at least 68 kg by pulling it. We decline all re-
sponsibility in the event of a fall of the ceiling fan.
WOOD CEILING
Position the support in the desired location and fix it using the screws provided.
CONCRETE CEILING
Position the support in the desired location and mark the holes to be made. Remove the support and drill the
concrete structure by making 3 Ø 6 mm holes. Remove dust and introduce the plugs supplied using a ham-
mer. Replace the support and fix it by using the screws provided.
WOOD CEILING-STRAIGHT
Ceiling
support
CONCRETE CEILING-STRAIGHT
Ceiling
support
19