Publicité
Les langues disponibles
Les langues disponibles
4. Maintenance
The winch must be unloaded for inspection and maintenance tasks.
Inspection and maintenance tasks must be performed by skilled personnel, e.g. via your Gebuwin
dealer.
Inspection/ Maintenance
interval
Before each use
Per quarter
Annually
* Texaco "Texclad premium 2" is recommended by us for the worm - worm wheel gearing (or equivalent).
Orders can be placed through your Gebuwin dealer or on the website:
5. Troubleshooting
Trouble/Malfunction
The unloaded winch rotates
heavily
The load cannot be held
The load pressure brake does
not function
6. Service
For servicing and/or servicing parts contact your nearest Gebuwin dealer.
The exploded view diagram with regard to the servicing parts is available on the internet website:
www.gebuwin.com
Orders for any necessary servicing parts can also be placed on the website.
Use original servicing parts only; correct functioning cannot otherwise be guaranteed!
7. Environment
At the end of the winch's lifespan, the various winch parts must be disposed of according to the
current environmental regulations.
Tasks
visually check cable and loading hook
-
check amount of grease* on the worm wheel gearing
-
check the brake function
-
visually check cable and loading hook for any fracture
-
grease the worm - worm wheel gearing
-
check the load pressure brake for wear and tear
-
Replace the brake discs as needed
Be careful: Do not get any grease on the brake discs or preceding
surfaces
-
check the cable according to DIN 15020 pg. 2 for wear and tear; also
test and maintain the minimum breaking force.
-
check the tightness of the mounting bolts
check all the winch parts for wear and tear; replace where necessary;
-
grease where needed.
check the type identity sticker for clarity
-
Cause
no grease on the gearing
-
-
dirt on the gearing
-
during mounting the winch has
pulled askew
the cable has been incorrectly
-
wound round the drum which
means the crank turning
direction is incorrect
-
the brake discs are either worn
down or faulty
braking mechanism and/or discs
-
are jammed due to infrequent
use
www.gebuwin.com
Solution
apply grease
-
-
clean with a detergent and re-
grease
-
level the mounting surface and re-
mount the winch
wind the cable correctly around
-
the drum
-
check and/or renew the brake
discs
loosen the brake by hitting the
-
crank in the correct turning
direction with the flat of the hand
12
Publicité
