Zipper Maschinen ZI-COM50-2V5E Mode D'emploi page 22

Safety instructions when working with compressed air guns
Compressor pump and lines reach high temperatures during operation. Touching cause burns
•
When removing the hose coupling, hold the coupling piece of the hose is by hand. So the injury from
•
rebounding hose is avoided
Safety instructions when paint spraying
Do not process paints or solvents with a flash point of less than 55° C.
•
Do not heat paints and solvents.
•
If harmful liquids processed use dust masks. Note the instructions on protective measures made by the
•
manufacturers of such substances.
During the paint spraying process and in the work space may not be smoked. Even paint fumes are
•
highly inflammable.
In working area smoking and open flames are forbidden during paint spraying.
•
Do not keep or consume food and drinks in the working area. Paint fumes are harmful.
•
Work only in a well ventilated area that is bigger than 30m³. Do not spray against wind direction. Note the
•
local regulations.
Do not process white spirit, butyl alcohol and methylene chloride when use PVC hoses because lifetime will
•
substantially reduces
Operation of pressure vessels
Anyone who operates a pressure vessel has this to get in proper condition, operate it properly, monitor,
•
make any necessary maintenance and repair work without delay and to meet the circumstances
necessary security measures.
A pressure vessel may not be operated if it has defects or will endanger employees or third persons.
•
The pressure vessel must be regularly checked for damage such rust,..
•
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-COM50-2V5E / ZI-COM50-2V510E
 Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the
machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
SAFETY
22