SEVERIN MW 7759 Mode D'emploi page 30

Setting multiple programmes
The microwave can be set for 2 separate programmes to run consecutively without having to restart the unit in-between;
eg regular cooking with the microwave function first, followed by cooking 'au gratin' using the grill. This multiple-programme
feature can be used with any of the microwave, hot-air, grill and combination functions. The automatic cooking programmes
and the quick-programme are not suitable for multiple programming.
∙ Press the button for the particular programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Now press the button for the next programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Use the rotary control to start the cooking process.
∙ The appliance starts the first programme. The display shows S1. As soon as the next programme is started, the display
changes to S2.
Hint:
This function is especially helpful when using the microwave to cook food at different power settings. While a higher power
setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that the
heat is evenly distributed when the food is already done.
Saving your favourite dish
The above described programmes and programme combinations can be saved as 'Favourite dishes' for future quick use.
Three different dishes may be pre-stored. If a memory space is not occupied, its corresponding number flashes. But note
that in this mode, the automatic cooking programmes and the quick-programme cannot be selected.
∙ Press the button briefly once, twice or three times. The number 1, 2 or 3 start flashing in the display.
∙ Press the button for the particular programme repeatedly until the power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Now press the button for the next programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Press the button again briefly to save the favourite dish.
∙ The saved programme can be started by briefly pressing the
∙ If the appliance has been disconnected from the mains, the programmes must be saved again.
∙ If a memory space is already occupied, the corresponding number will not flash. However, the memory space can be
simply over-written as described above.
Pizza-Express function
∙ For the quick preparation of frozen pizza.
∙ Place the frozen pizza on the turntable.
∙ Briefly press the button
∙ The weight 350 (=350 g) is shown in the display.
∙ For a larger pizza, use the rotary control to change the weight to 450 g.
∙ Press the rotary control to confirm.
∙ The pre-set time (7 min for 350 g / 10 for 450 g) is displayed.
∙ If desired, the cooking time can be changed using the rotary knob, or by briefly pressing
∙ Pressing the rotary control to start the cooking process.
∙ The cooking process starts.
∙ After processing, the light ring on the rotary control flashes for one minute. If the pizza does not yet show the desired
degree of browning, use the rotary control, or briefly press the
control to re-start.
∙ After one minute, the light ring goes out and the current time is shown in the display. The light ring can also be switched
off immediately by pressing the
30
.
button.
button first and then the rotary control.
button, to add extra cooking time. Press the rotary
.