SEVERIN MW 7760 Mode D'emploi page 28

Setting multiple programmes
The microwave can be set for 2 separate programmes to run consecutively without having to restart the unit in-between;
eg regular cooking with the microwave function first, followed by cooking 'au gratin' using the grill. This multiple-programme
feature can be used with any of the microwave, grill and combination functions. The automatic cooking, defrosting and quick
programmes cannot be selected here.
∙ Press the button for the particular programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Now press the button for the next programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Use the rotary control to start the cooking process.
∙ The appliance starts the first programme. The display shows S1. As soon as the next programme is started, the display
changes to S2.
Hint:
This function is especially helpful when using the microwave to cook food at different power settings. While a higher power
setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that the
heat is evenly distributed when the food is already done.
Saving your favourite dish
The above described programmes and programme combinations can be saved as 'Favourite dishes' for future quick use.
Three different dishes may be pre-stored. If a memory space is not occupied, its corresponding number flashes. The
automatic cooking, defrosting and quick programmes cannot be selected here.
∙ Press the button briefly once, twice or three times. The number 1, 2 or 3 start flashing in the display.
∙ Press the button for the particular programme repeatedly until the power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Now press the button for the next programme repeatedly until the desired power setting/temperature is shown.
∙ Use the rotary control to select the desired cooking time.
∙ Press the button again briefly to save the favourite dish.
∙ The saved programme can be started by briefly pressing the
∙ If the appliance has been disconnected from the mains, the programmes must be saved again.
∙ If a memory space is already occupied, the corresponding number will not flash. However, the memory space can be
simply over-written as described above.
Automatic cooking and defrosting programmes
These programmes are helpful when cooking or heating up food without having to select any particular settings, e.g. for
power or cooking time.
∙ Turn the rotary control anti-clockwise until the display shows the required programme listed in the table below. Press the
rotary control.
∙ Use the rotary control to select the appropriate weight (see table).
∙ Press the rotary control to start the programme.
∙ The display shows the selected programme running time.
Menu
A-1
Beverages
A-2
Nudeln
28
button first and then the rotary control.
Weight
200 ml
400 ml
600 ml
100 g (in 400 ml cold water)
200 g (in 800 ml cold water)
300 g (in 1200 ml cold water)
Display
1
2
3
100
200
300