Krüger & Matz Odyssey 5.1.2 Manuel D'utilisation page 25

Owner's manual
OPERATION
Turning on
1. After plugging the soundbar to mains, it will go to standby mode.
2. To turn in on, press the power button.
3. To turn it off completely, unplug it from the power.
4. If the soundbar is connected to the TV or to an external device, it will
turn on automatically after turning on the TV or an external device.
5. If no sound is detected after 15 minutes, the soundbar will turn off.
Mode selection
To change the source of sound, press the SOURCE button on the
soundbar or select source on the remote control. Selected mode will
be shown on the display.
Sound adjustment
• To adjust the bass and treble level, use the BASS and TREBLE buttons.
• To turn the surround sound on or off, press the SURROUND button.
• To change the equalizer effect, press the EQ button.
• To change the volume level, use the VOLUME buttons.
• To mute the sound, press the mute button.
• To set audio delay, use the AV SYNC buttons.
BLUETOOTH
Before pairing:
• Bluetooth range is around 8 meters. Do not exceed the range.
• Manufacturer does not guarantee compatibility with all external
devices.
• Make sure, that between the soundbar and external device, there
are no obstacles.
• If there is no connection within 2 minutes, the soundbar will return
to previously selected mode.
• If external device cannot find the soundbar, press and hold the
Bluetooth button to enable visibility.
EN
25