Krüger & Matz Odyssey 5.1.2 Manuel D'utilisation page 22

CONNECTING
Connecting to power supply
Connect the AC plug to the
power socket. Plug the cord to a
mains socket. This applies to
both soundbar and subwoofer.
Dolby Atmos
Dolby Atmos technology gives you amazing experience with sound
that is rich, clear and powerful. Dolby Atmos technology is available
only in HDMI mode.
1. To use Dolby Atmos, the TV must support it.
2. Make sure that the "No encoding" option is enabled on external
device.
3. If Dolby Atmos is enabled, the display will show DOLBY ATMOS /
DOLBY AUDIO / PCM AUDIO.
4. To use this, connect the soundbar with HDMI 2.0 cable.
HDMI connection
Some 4K HDR TVs require enabling HDR content reception option
enabled. To enable it, refer to instruction manual of your TV.
EN
Method 1: ARC (Audio Return Channel)
The ARC function allows to send
audio from ARC-compliant TV to
soundbar with a single HDMI
cable. Connect the HDMI cable
and switch to HDMI (eARC/ARC).
TV remote control can now be
used for controlling soundbar
volume. TV must support ARC
function as well as HDMI-CEC.
22
Owner's manual
HDMI
eARC/ARC
HDMI OUT
(eARC/ARC)