Hama Spirit Go Mode D'emploi page 7

6. Bluetooth pairing
®
Note - Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your device .
The earphones and the device should not be more than 1 metre apart . The shorter the distance, the
better .
Ensure that the earphones are switched on .
Check the status of the status LED (3) and the announcements
1
"Pairing"
red + blue
"Connected"
blue
-capable device is switched on and that Bluetooth
®
If the status LED (3) of an earphone is flashing alternately
and the announcement is:
the earphones are searching for a Bluetooth
If the status LEDs (3) are flashing slowly and the
announcement is:
the earphones are already paired with a Bluetooth
is activated .
®
connection .
®
device .
®
5