Veromatic MBE01 Installation, Utilisation Et Entretien page 60

Fix the brewer with the pin.
13
Reinstall the waste bucket in the machine.
14
Close the outlet bracket.
15
Close the door.
16
Turn the machine on.
17
Run a brewer cleaning cycle in the Rinse menu:
18
• Go to 'Brewer cleaning cycle'.
• Follow the instructions on the display.
• Empty the drip tray and waste bucket when asked.
• Close the door.
• Place a large enough (± 1 L) container underneath the outlet to catch the cleaning liquid and
confirm with Start.
• The brewer is first pre-rinsed.
• Open the door and insert a cleaning pill in the brewer chute when asked. Regular pills of 1.6
gram are advised, max. is 3.5 grams.
• Close the door, place the canister back underneath the outlet to catch the cleaning liquid and
confirm with 'Start'.
• Now the brewer is thoroughly cleaned. Attention: this proces runs for several minutes. It is
important to let the machine finish the cleaning proces. Finally the brewer will be rinsed 3x and
a espresso product will be given as a last step.
61
EN