Subwoofer; Satellite Loudspeakers - Conrad RAVELAND XAB 5000 MkII Notice D'emploi

• Mark the holes for the screws at the place of installation. Use the device itself as a model for this.
• Drill the holes for the fastening screws.
• Tighten the amplifier with suitable screws.
b) Subwoofer
• Attach the subwoofer with straps or similar fixtures. This fastening must be also able to bear the load of the
subwoofer in case of an accident.
• The boot is a suitable place for installation.
c) Satellite loudspeakers
• Look for a suitable position for mounting the satellite loudspeaker.
• Make sure that the room necessary behind the mounting area is sufficient for the required depth of installation.
For installation in the door, take into consideration the room which the wound down window requires.
• The mounting area must be stable enough to enable secure attachment. It can possibly be strengthened by a
wooden board or similar.
• After you have set the place for mounting the loudspeakers, cut out the installation openings for the loudspeakers.
Mount the loudspeakers in accordance with the following illustration:
29