Publicité
Les langues disponibles
Les langues disponibles
5. Swing function
After the machine is started, press
swing.
Draining the collected water
When the drainage tank is full, the tank full indicator light will turn on, the
operation will stop automatically, and the buzzer will beep 15 times to alert the
user, that the water needs to be emptied from the drainage tank.
Emptying the drainage tank
1. Lightly press on the sides of the tank with both hands and pull out gently.
(see Fig. 1)
2. Discard the collected water. (Fig. 2)
3. Once it is empty, replace the tank in the appliance. When replacing the
drainage tank, press the tank firmly into place with both hands. If the tank is
not positioned properly, the Water-full sensor will be activated, and the
dehumidifier will not operate. (Fig. 3)
NOTE
1. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene,
thinner, or other solvents, as these can scratch and damage the tank and
cause water leakage
2. When replacing the drainage tank, press the tank firmly into place with both
hands. If the tank is not positioned properly, the "TANK FULL" sensor will be
activated, and the dehumidifier will not operate.
Instructions for use
Fig. 2
Fig. 1
to start or stop the air-outlet leaf
Fig. 3
English
7
Publicité
