GE AEN08 Série Manuel D'utilisation Et Instructions D'installation page 10

REMOVE THE AIR CONDITIONER
3
FROM THE CASE (CONT.)
Slide the air conditioner from the case by
E
gripping the base pan handle and pulling
forward while bracing the case. Do not pull or
lift on the styrofoam discharge area
ATTACH THE TOP MOUNTING RAIL
4
SEAL STRIP
Remove the backing from the top mounting rail
seal strip and attach the seal strip to the bottom
of the top mounting rail, along the front edge.
FRONT VIEW
Seal strip
Installation Instructions
Do not
pull or
lift in this
damage
to the
unit may
result
FRONT
Top mounting rail
Remove
backing
from seal
strip
Top mounting rail
INSTALL THE TOP MOUNTING RAIL
5
ONTO THE CASE
Attach the top mounting rail onto the top of the
case with 3 Type B screws.
INSTALL THE
6
SIDE ACCORDION PANELS
Slide the left and right accordion panels into
A
the top and bottom mounting rails.
B
Attach the accordion panels to the case using
3 Type A screws on each side.
Accordion
panel
Type A
screws
PREPARE THE WINDOW
7
width and stick the adhesive side to the
bottom of the sash.
10
Type B
screws
Top
mounting
rail
Top mounting rail
BACK
Bottom mounting rail
Window sash seal
INSIDE